Take me to the Perimeter Protection Group website
Extranet

EntraQuick® I & II – the smart combination of gate and barrier

Our EntraQuick® quick folding gate is a type-tested, trackless bi-hinged gate, which is ideally suited to keep your driveways secured. It´s fast opening and closing speed allows an opening and closing after every entry or exit. It boasts speed, stability and is very reliable and low maintenance.

With the TÜV type-tested quick folding gates EntraQuick® you’ll get a full-height perimeter protection in closed position. Due to its trackless design, it offers unobstructed security for each entry or exit situation. It’s fully cantilevered and has been designed with rationality in mind. The EntraQuick® competes against both sliding gates and boom barriers at the same time!

The quick folding gates’ extremely high speed allows a quick closing after each passage. This makes it efficiently support smooth workflows in everyday operation! Furthermore, no run back area is required. Because of its solid bar infill and the ingenious lever kinematics EntraQuick® is particularly stable and doesn’t require an additional floor lock in closed position.

EntraQuick® can be installed easily and quickly thanks to pre-assembled drive post and folding leaf units. It is driven by two AC motors. The gate leaves fold open inwards towards the secure site and each leaf can be opened separately if required.

The quick folding gates are perfect substitutes for combined sliding gate and barrier installation at access points. There are two models available in different heights and opening widths. Depending on requirements EntraQuick® can easily be combined with other products. In combination with the TurnSec turnstiles it creates a vehicle access point with pedestrian separation.

Show Video

Outstanding performance

Extremely high speed for quick opening and closing to efficiently support smooth workflows in everyday operation

Particularly stable due to solid bar infill and ingenious lever kinematics

No run back area in case of limited space

In combination with the TurnSec turnstiles it creates a vehicle access point with pedestrian separation

EntraQuick® I 
Gate height2.050 mm, 2.450 mm*
Clear opening width3.000 - 6.000 mm in 500 mm increments
InfillBar infill RHS 30/20 mm
FoundationTop edge of foundation 200 mm below finished floor level (Standard),
other lowerings possible
Drive unitOne or two knee-joint drives (depending on model)
Control unitMultifunctional, automatic control WE-Tronic II
with integrated frequency converter
InterlockingVia drive mechanism supported by interlocking of gate leaves
through reception fork and in-feed roller
CertificationTÜV type-tested according to DIN EN 13241-1
OptionsSee technical datasheet online
*Incl. 100 mm ground clearance
EntraQuick® II 
Gate height2.050 mm, 2.550 mm, 3.050 mm**
Clear opening width4.000 - 10.000 mm in 500 mm increments*
InfillBar infill SHS 30 mm
FoundationsTop edge of foundation 200 mm below finished floor level (Standard),
other lowerings possible
Drive unitOne or two knee-joint drives (depending on model)
Control unitMultifunctional, automatic control WE-Tronic II
with integrated frequency converter
InterlockingVia drive mechanism supported by interlocking of gate leaves
through reception fork and in-feed roller
CertificationTÜV type-tested according to DIN EN 13241-1
OptionsSee technical datasheet online
*For a CWO > 8,0 m the maximum height is 2.05 m
**Incl. 100 mm ground clearance

Additional Information

Download PDF

INTERESTED IN THIS PRODUCT?

Please contact us

+49 (0)5258 50070 or sales@perimeterprotection.net