Take me to the Perimeter Protection Group website
Extranet

Cost-effective and space-saving swing gates

PPG swing gates are the ideal choice for lower-frequented entrances or exits where run-back area is limited. The hand-operated swing gates feature high-stable profiles and hinges and are installed quick and easy. Different gate infill or several RAL colours allow an individual adaption.

Swing gates from Perimeter Protection Group are the ideal choice for driveways where back-up space is limited due to small space requirements and very attractive price-performance-ratio. The gates have stable, high-quality profiles and hinges with good resistance to distortion that guarantee an optimum and long period of reliable locking. All swing gates are galvanised per DIN EN 1461. The special, solvent-free coating methods per DIN EN ISO ensure longevity and are good for environmental sustainability.

The hand-operated swing gates allow quick and easy installation and are low maintenance. They are ideally suited for entrances and exits, which are not used continuously. One- or two-leaf gates in various widths and heights are available. On request, it’s also possible to get different gate fillings or prepare the gates for on-site infill with sheet metal, wood, etc.

Vario gates

The flexible Vario 180 swing gates from Perimeter Protection Group are quality products made in Germany. They feature a high-quality German mortise lock made with stainless forend and latch lever, prepared for profile cylinders. They are easy to install and the latch can also be changed to desired opening direction of the gate system on site. The sturdy frame profiles are punched, sawed and welded on mitre. Welds are polished prior to galvanising.

All steel parts are hot-dip galvanised or galvanised and subsequently coated with a polyester powder. Furthermore – freely selectable opening directions make the gates unbeatable flexibility. The Vario 180 gate also offers a 180 ° opening angle, which maximises the usable opening width compared to conventional gates with 90 ° opening angle.

Single-leaf-swing-gates FT1-H 
Gate height650 - 2450 mm**
Clear opening width500 - 8000 mm
FrameStable pipe frame profiles
InfillBar infill, welded mesh
Opening angle180°
PostExtended for embedding in concrete according to gate size or optional bottom plates
FeaturesReinforced gate holders, Aluminium gate handles, high-quality mortise locks with profile cylinders
CoatingGalvanised DIN EN ISO 1461, galvanised and powder-coated per RAL: RAL 6005 (moss green) and RAL 7016 (anthracite grey) ***
OptionsIntercoms, lever handles and knobs, lever or panic locks, serrated strips as anti-climbing device, asymmetrical leafs (for double-leaf gates), slope adjustments, welded fence connections, preparation and reinforcement for customer drives
* Three leaf gates or special versions up to 10 m CO (single-leaf) and up to 20 m CO (double-leaf) on request
** Incl. 50 mm ground clearance*** More than 200 other RAL colours on request
Double-leaf-swing-gates FT2-H Plus* 
Gate height650 - 2450 mm**
Clear opening width1000 - 16000 mm
FrameStable pipe frame profiles
InfillBar infill, welded mesh
Opening angle180°
PostExtended for embedding in concrete according to gate size or optional bottom plates
FeaturesReinforced gate holders, Aluminium gate handles, high-quality mortise locks with profile cylinders
CoatingGalvanised DIN EN ISO 1461, galvanised and powder-coated per RAL: RAL 6005 (moss green) and RAL 7016 (anthracite grey) ***
OptionsIntercoms, lever handles and knobs, lever or panic locks, serrated strips as anti-climbing device, asymmetrical leafs (for double-leaf gates), slope adjustments, welded fence connections, preparation and reinforcement for customer drives
* Three leaf gates or special versions up to 10 m CO (single-leaf) and up to 20 m CO (double-leaf) on request
** Incl. 50 mm ground clearance*** More than 200 other RAL colours on request
Vario gates 
Gate height830 - 2030 mm
Clear opening width1000 - 1500 mm
Opening angleApprox. 180 ° opening angle
Opening directionLeft or right (optional)
FrameCircumferential frame consisting of square hollow section 40 x 40 mm
InfillWelded mesh with 6/5/6 mm wire diameter and a mesh size of 50 x 200 mm
AccessoriesM12 stainless steel eye bolt, high-quality mortise lock with stainless forend and latch lever, prepared for profile cylinders for
an on-site change to desired opening direction of the gate, gate handle with rosettes and profile cylinder rosettes made from
high-quality, silver E6/EV1 anodised aluminium parts, stainless steel mounting brackets for fence connection

INTERESTED IN THIS PRODUCT?

Please contact us

+49 (0)5258 50070 or sales@perimeterprotection.net